ArchiGreen® FL 150 is CE-certified, needled felt made of thermally non-treated, non-rotting virgin polypropylene fibres. It serves as a filter layer in an extensive green roof build-up. Surface weight: 150 g/m2; thickness: 2 mm; CBR test EN ISO 12236: 1.7 kN; tensile strength EN ISO 10319: 10.3 kN/m, elongation at break MD/CMD: 45/55%; pore size EN ISO 12956: O90 = 0.11 mm; water permeability EN ISO 11058: 100 mm/s, q: 100 l/m2xs; laid with an overlap of 100 mm. Complies with FLL guidelines 8.2/2002.
ArchiGreen® FL 150 is CE-certified, needled felt made of thermally non-treated, non-rotting virgin polypropylene fibres. It serves as a filter layer in an extensive green roof build-up. Surface weight: 150 g/m2; thickness: 2 mm; CBR test EN ISO 12236: 1.7 kN; tensile strength EN ISO 10319: 10.3 kN/m, elongation at break MD/CMD: 45/55%; pore size EN ISO 12956: O90 = 0.11 mm; water permeability EN ISO 11058: 100 mm/s, q: 100 l/m2xs; laid with an overlap of 100 mm. Complies with FLL guidelines 8.2/2002.
Application area: The FL 150 is part of our FL filter sheet range. FL 150 filter layer is primarily used to serve filtration purposes in a green roof build-up where it is rolled out over the drainage layer. An overlapping of at least 100 mm is required between the adjacent filter sheets. Openings must be cut in the filter sheet above the roof outlets.
Benefits:
Material | polypropylene |
---|---|
Thermal treatment | non-treated |
CE marking | affixed |
Weight per unit area | 150 g/m² |
Tensile strength | warp (MD): 10.3 kN/m |
Elongation at break | warp (MD 55 % |
CBR puncture | 1.7 kN |
Dynamic perforation test | 16.5 mm (EN ISO 13433) |
Pore size, O90 | 0.11 mm |
Water permeability normal to the plane | VIH50=100 mm/s |
Width | 2 m |
Length | 100 m |
Area of roll | 200 m² |
Weight | ~ 30 kg |
Diameter of roll | ~ 45 cm |
Colour | black |
Application area: The FL 150 is part of our FL filter sheet range. FL 150 filter layer is primarily used to serve filtration purposes in a green roof build-up where it is rolled out over the drainage layer. An overlapping of at least 100 mm is required between the adjacent filter sheets. Openings must be cut in the filter sheet above the roof outlets.
Benefits:
Material | polypropylene |
---|---|
Thermal treatment | non-treated |
CE marking | affixed |
Weight per unit area | 150 g/m² |
Tensile strength | warp (MD): 10.3 kN/m |
Elongation at break | warp (MD 55 % |
CBR puncture | 1.7 kN |
Dynamic perforation test | 16.5 mm (EN ISO 13433) |
Pore size, O90 | 0.11 mm |
Water permeability normal to the plane | VIH50=100 mm/s |
Width | 2 m |
Length | 100 m |
Area of roll | 200 m² |
Weight | ~ 30 kg |
Diameter of roll | ~ 45 cm |
Colour | black |